Sanitary Bulk Material Handling Equipment Cleanability: Value, Risk & Outcome
Can a typical, industrial bulk material handling system in a sanitary processing operation be thoroughly cleaned, even to the microbial level? Probably. But, with every cleaning event of a process-inappropriate bulk material handling system comes increased costs for labor, consumables (such as detergents and water), and energy. And, more importantly, with hard-to-clean equipment in sanitary applications comes a greater risk for inspection failure and product contamination. This post, the third in a series (Part 1 and Part 2) regarding sanitary bulk material handling equipment, will address several structural design features to look for in the construction of application-specific, sanitary bulk material handling equipment. To proactively specify these cleanability design features into sanitary bulk material handling equipment will reduce the costs and time of cleaning events, will aid in improving validation and inspection outcomes, and will ensure optimal compliance contribution (OCC).
Continuous weld seams are ground to a No. 4 finish, hand-burnished to eliminate pits, dimples, and crevices.
• Continuous-weld seams, ground smooth to a No. 4 finish: Weld seams, particularly in product contact areas and adjacent areas, must be free of pits, dimples, and crevices that could harbor contaminants such as material residue, microbes, and allergens. In addition to the No. 4 finish, hand-burnished weld seams will improve gross soil removal and resistance to microbial build-up during operation and cleaning.
Non-obstructing raceway contains unbundled utility lines; reduces material build-up, eases cleaning, inspection.
• Unbundled Utility Lines and Hoses: Counter to the typical, industrial machine design philosophy, the utility lines and hoses should be left unbundled. Unbundled utilities will minimize the accumulation of food, dirt, or other organic matter; and therefore reduce the opportunity for growth of microorganisms. Unbundled does not mean uncontrolled. A non-obstructive raceway contains the utility lines and hoses and enables fast and thorough cleaning, promotes material release, eliminates re-cleaning, and aids validation and inspection.
• Laser-cut, Single-plate Sideframe Construction: Typical, industrial machine design often builds substructures using square-tube framework. However, inherent with square-tube construction is the significant number of internal angles, corners, and welded seams that will often block contaminants from cleaning procedures. Laser-cut, single-plate frameworks provides significant cleanability and sanitary operating advantages over square-tube framework. By eliminating the internal angles, corners, and weld seams, laser-cut, single-plate framework reduces cleaning steps, reduces water and detergent use, improves cleanability, and protects product from contamination.
Sure, process-inappropriate equipment can be put into sanitary processing operations, and it may perform its mechanical operations effectively. But, for the sanitary process operation that is driven by external influences such as regulatory compliance, or internal influences such as HACCP programs, application-specific sanitary equipment construction will provide OCC without compromise to the equipment's mechanical operation.
Sanitary Bulk Material Handling Equipment: Structural Design and Contaminant Removal
As part of an ongoing series regarding sanitary bulk material handling equipment, this post will address the specific issue of structural design of sanitary bulk material handling equipment, and the critical role structural design has in ensuring the safety of sanitary product. Of course, sanitary structural design and sanitary materials of construction are equally important factors effecting the ability of bulk material handling equipment to provide optimal compliance contribution (OCC). For detailed information regarding materials of construction in sanitary equipment, please see this previous post.
In the matter of sanitary bulk material handling systems' structural design, it is worthwhile to restate an essential premise, that premise being: it is possible for two different pieces of equipment, placed into perfectly matching sanitary applications, performing the same mechanical function, and each having achieved compliance, for a unit designed to the specific, sanitary requirements of the application to have a significantly greater ability to prevent contaminants from entering the sanitary process stream than a general, industrial unit force-fit into the application. Let's take a look at several application-specific, sanitary design features that improve cleanability, improve validation and inspection outcomes, protect product safety, reduce consumables use, and ensure improved OCC.
Rounded cross members and angled flat surfaces eliminate material accumulation and pooling of liquids.
• Rounded framework beams and angled, rounded cross members: The use of rounded structural framework in sanitary construction, rather than square tubing common in general industrial equipment construction, eliminates flat surfaces where material accumulation and pooling of liquids can occur. The rounded cross members are also angled away from product contact areas to move material and liquids away from product and speed drainage and drying during cleaning.
• No internal angles or corners; flat surfaces angled 45˚ to horizontal: Notorious for accumulating contaminants and being difficult to clean, validate, and inspect; internal angles and internal corners in structural elements and component construction should be cut out during fabrication to eliminate areas where contaminants can gather. If flat surfaces are present, on controls enclosures, for example; these surfaces should be angled, at least to 45˚ to horizontal, and directed away from product contact areas.
Material release openings remove foreign materials from the sanitary process stream.
• Material release openings: With force-fit, general industrial dry bulk material handling systems, foreign materials (materials other than the intended process material) are often inadvertently directed into the sanitary material process stream because no accommodation has been made to collect and remove them. An application-specific, sanitary bulk material handling equipment design must proactively integrate foreign material release openings at every handling action point; from input to final packaging.
Sanitary suspension design offsets controls enclosure from equipment framework.
• Controls enclosures offset from structural framework: The necessary proximity of control enclosures near to the process stream, and their numerous inherent right angles, make controls enclosures a challenge to thoroughly clean and inspect. Beyond simple standoffs (also common to force-fit equipment), a highly sanitary enclosure management design uses a cut-out inset area and suspension to offset the enclosure from the structure. This design creates material release openings and visual inspection openings, and eliminates right angles, welded joints, and flat surfaces where microbes, allergen residues, and proteins associated with gluten can accumulate.
Structural design of application-specific, sanitary bulk material handling equipment must be a proactive effort. A pre-production HACCP assessment of the application will effectively guide the framework and component designs as well as the selection of the materials of construction. Avoiding the common design errors associated with force-fit, general industrial bulk material handling systems will ensure the protection of product and personnel, reduce cleaning and sanitizing times, and enable the highest levels of optimal compliance contribution.
Bulk Bag Filler and Bulk Bag Unloader: Automated, Single-system Process Operation
This bulk bag filler system; receiving input material from an integrated bulk bag unloader, an integrated bag dump station, and a vibratory conveyor system, enabled the material processing operation to effectively transition to an automated, 20,000 lb./hour, bulk bag filling process from a relatively low-capacity, operator-intensive, 50 lb. bag filling system.
Multiple materials, all with differing characteristics, including: fast-flowing, dusty, sticky, and static-charged, enter the process operation based on the specific recipe selected at the system HMI by the operator. The NBE bulk bag unloader, receiving bulk bags of severely agglomerated material, starts an integrated, automated material conditioning sequence, including: massage paddles with 2,200 lbs. of paddle pressure, and an agitator hopper to prepare the material for supply, via screw conveyor, to the bulk bag filler. For secondary ingredients, a bag dump station, integrated to the bulk bag unloader, enables manual introduction of material to the agitator hopper for conditioning, blending, and supply to the bulk bag filler. The primary ingredient, supplied from downstream pneumatic conveying, is introduced to the bulk bag filling process through a 24” wide, 304-2b stainless steel, vibratory conveyor with a total material supply capacity of 20,000 lbs./hour.
This automated, bulk bag filler and bulk bag unloader system was built to be compliance-ready at start-up and to conform to the specific, regulated processes and practices of the Class II, Div. 2, Group G process area, as well as explosion protection and control features for venting, directlng, and releasing overpressure. NBE was the single-source provider of the system’s controls and automation, and was singularly responsible for integration of the system controls to the facility’s supervisory control and data acquisition system (SCADA). This NBE bulk bag filler and bulk bag unloader system significantly increased line capacity, improved resource management, reduced operating burden, increased labor efficiency and safety, and extended equipment contribution and performance lifecycles.
Bulk Filling and Discharging Equipment Guide Book Presents In-use Advantages of Application-specific Sanitary Equipment Versus Force-fit General Equipment
The second in a series of bulk material handling equipment guide books has been released. This newest guide book, entitled, Sanitary Bulk Filling and Discharging Systems Data and Specification Guide Book, was developed to bring clarity to the common, yet inaccurate, perceptions of complexity and confusion associated with the integration of bulk material handling equipment to sanitary process operations.
The Sanitary Bulk Filling and Discharging Systems Data and Specifications Guide Book addresses two primary areas of concern shared amongst production and process engineers, plant operations and management personnel, and corporate managers, with respect to sanitary
The Sanitary Bulk Filling and Discharging Systems Data and Specifications Guide Book details bulk bag filler systems, bulk bag unloader systems, bulk container dumper systems, and bag dump stations. Specific content includes: materials of construction guidelines for sanitary structures and components; WIP, CIP, and SIP-ready equipment design and construction; U.S. and IEC/ISO controls and automation compliance; and application-specific risk assessment implementation.
bulk material handling equipment. These concerns are: (i) identifying alternatives to force-fit, general industrial equipment designs touted as sanitary merely because of their stainless steel materials, and (ii) gaining confidence in matters relating to regulatory compliance of sanitary bulk material handling equipment, and the conformance of sanitary bulk equipment to regulated processes and practices. The guide book responds to these, and other issues, by explaining how application-specific, compliance-ready, sanitary bulk material handling systems eliminate the inspection failures, retrofits, corrective fabrication and finishing, and re-programming and re-inspection resulting when general, industrial equipment designs are force-fit into sanitary applications. The guide book also addresses the issue of sanitary equipment relative to process and practice acceptance, and the corresponding importance of selecting a bulk material handling equipment manufacturer based on an assessment of their proficiencies in areas such as: domestic and international regulatory matters; SCADA and single-unit controls and automation integration; manufacturing resources; systems commissioning; and installed base of relevant, integrated, sanitary bulk material handling systems.
The Sanitary Bulk Filling and Discharging Systems Data and Specifications Guide Book details bulk bag filler systems, bulk bag unloader systems, bulk container dumper systems, and bag dump stations. Specific content includes: materials of construction guidelines for sanitary structural framework and components; WIP, CIP, and SIP-ready equipment design and construction features; U.S. and IEC/ISO controls and automation compliance capabilities; and application-specific risk assessment implementation. The guide book also offers a summary overview of other bulk material handling equipment, including: bulk material mixing and blending, bulk material weighing, and bulk material storage systems.
The first guide book in this series is entitled, Automated Bulk Filling and Discharging Systems Data and Specifications, and is also available for immediate download.